HP 2830, 2840, 2820 Setting the fax-error-correction mode, To change the error-correction setting

Models: 2830 2820 2840

1 334
Download 334 pages 53.45 Kb
Page 130
Image 130

Setting the fax-error-correction mode

Usually, the device monitors the signals on the telephone line while it is sending or receiving a fax. If the device detects an error during the transmission and the error-correction setting is On, the device can request that the portion of the fax be resent. The factory-set default for error correction is On.

You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas, or receive one from overseas, or if you are using a satellite telephone connection.

To change the error-correction setting

1.On the device control panel, press MENU.

2.Use the < or the > button to select Fax setup, and then press ENTER.

3.Use the < or the > button to select All faxes, and then press ENTER.

4.Use the < or the > button to select Error correction, and then press ENTER.

5.Use the < or the > button to select On or Off, and then press ENTER to save your selection.

114 Chapter 8 Fax

ENWW

Page 130
Image 130
HP 2830, 2840, 2820 manual Setting the fax-error-correction mode, To change the error-correction setting