Maximizing print speed for letter-size paper

The printer can print at 20 ppm in black on letter-size paper. When printing letter-size pages from tray 2, this happens automatically.

For tray 1, the printer is set at the factory to print 19 ppm in black on letter-size paper. To achieve a print speed of 20 ppm from tray 1, set the tray 1 size to letter. To set the tray 1 size, open the HP Toolbox, click the Settings tab, click Configure Device, and click Paper Handling. Set the tray 1 size to letter.

When tray 1 is configured for letter, and a print job specifies another media size such as envelopes, the Error light blinks until you load the correct print media into tray 1 and press

ENTER.

Also, to achieve a print speed of 20 ppm (19 ppm for A4), you must set the device to print in grayscale. For more information, see Printing in grayscale.

ENWW

Maximizing print speed for letter-size paper

43

Page 59
Image 59
HP 2820, 2840, 2830 manual Maximizing print speed for letter-size paper