HP 2840, 2830, 2820 manual Creating stamp-received faxes, To make stamp-received faxes available

Creating stamp-received faxes

	The device prints the sender identification information at the top of each received fax. You
	can also choose to have your own header information included on each received fax to
	confirm the date and time that the fax was received. The factory-set default for stamp-
	received faxes is Off.
	This option applies only to received faxes that the device prints.
Note

To make stamp-received faxes available

1.On the device control panel, press MENU.

2.Use the < or the > button to select Fax setup, and then press ENTER.

3.Use the < or the > button to select Fax Recv. setup, and then press ENTER.

4.Use the < or the > button to select Stamp faxes, and then press ENTER.

5.Use the < or the > button to select On or Off, and then press ENTER to save your selection.

ENWW Creating stamp-received faxes 113