Step

Verification step

number

 

8Does the device scan to the computer?

Initiate a scan from the basic desktop software at your computer.

Possible problems

Solutions

The cable is not connected correctly.

Reconnect the cable.

Software is not installed correctly or an

Uninstall and then reinstall the device

error occurred during software

software. Verify that you are using the

installation.

correct installation procedure and the

 

correct port setting.

If the error persists, turn off the device and then turn on the device.

If the error still persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box.

9Does the device recognize and print from a memory card?

Insert a memory card and print an index page. See Printing an index.

The device does not recognize the card.

The device does not print certain images.

Remove the card and reinsert it into the memory-card slot. Verify that the card is fully inserted into the slot.

Verify that the memory-card type is a supported type.

Verify that only one card is inserted in the memory-card slots.

Verify that the files on the memory card are in the correct format. The device recognizes only SRGB format .JPEG files.

216 Chapter 14 Troubleshooting

ENWW

Page 232
Image 232
HP 2830, 2840, 2820 manual Possible problems Solutions, Does the device recognize and print from a memory card?