
To reduce or enlarge copies for the current job
To reduce or enlarge copies for the current job only, use the following instructions.
1.On the device control panel, press REDUCE/ENLARGE.
2.Select the size to which you would like to reduce or enlarge the copies in this job. You can select one of the following sizes:
●Original=100%
●Lgl > Ltr=78%
●Lgl > A4=83%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full Page=91%
●Fit to page
●2 pages/sheet
●4 pages/sheet
●Custom:
If you select Custom:
If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).
3.Press START BLACK or START COLOR to save the selection and immediately start the copy job, or press ENTER to save the selection without starting the job.
Note | The change in the setting remains active for about two minutes after the copy job has been |
| completed. During this time, Settings=Custom appears on the device |
| You must change the default media size in the media input tray to match the output size, or |
| part of your copy might be cut off. For instructions, see Changing the default media size. |
ENWW | Reducing or enlarging copies 67 |