
Scanning from the device and HP Director (Macintosh)
The procedures described in this section are for Macintosh OS 10.2 and 10.3. Procedures for Macintosh OS 9.2.2 might vary.
For more information about tasks and settings described in this section, see the HP Director online Help.
For more detailed instructions about loading original documents onto the flatbed scanner or into the automatic document feeder (ADF) input tray, see Loading documents to scan.
Scanning to e-mail
1.Load the originals that are to be scanned
OR
Lift the flatbed scanner lid and load the original that is to be scanned
2.On the device control panel, press SCAN TO.
3.Use the < or the > button to select an
4.Press START SCAN. The original is scanned. The
Note | If you start the scan by clicking Scan to Email in the HP Director, the original is scanned to |
| the default |
| 5. Enter an |
ENWW | Scanning from the device and HP Director (Macintosh) 123 |