HP 2820 Changing ring patterns for call answering, To change ring patterns for call answering

Changing ring patterns for call answering

	Ring-pattern or distinctive-ring service is available through some local telephone companies.
	The service allows you to have more than one telephone number on a single line. Each
	telephone number has a unique ring pattern, so that you can answer voice calls and the
	device can answer fax calls.
	If you subscribe to a ring-pattern service with your telephone company, you must set the
	device to answer the correct ring pattern. Not all regions/countries support unique ring
	patterns. Contact your telephone company to determine if this service is available in your
	region/country.
	If you do not have ring-pattern service and you change the ring-pattern settings to something
Note
	other than the default, All Rings, the device might not be able to receive faxes.

The settings are as follows:

●All Rings: The device answers any calls that come through the telephone line.

●Single: The device answers any calls that produce a single-ring pattern.

●Double: The device answers any calls that produce a double-ring pattern.

●Triple: The device answers any calls that produce a triple-ring pattern.

●Double&Triple: The device answers any calls that produce a double-ring or triple-ring pattern.

To change ring patterns for call answering

To change ring patterns for call answering, complete the following steps:

1.On the device control panel, press MENU.

2.Use the < or the > button to select Fax setup, and then press ENTER.

3.Use the < or the > button to select Fax Recv. setup, and then press ENTER.

4.Use the < or the > button to select Answer Ring Type, and then press ENTER.

5.Use the < or the > button to select the ring pattern that you want, and then press ENTER.

6.After device installation is complete, ask someone to send a fax to you in order to verify that the ring-pattern service is working correctly.

94 Chapter 8 Fax ENWW