Supported media weights and sizes
| For optimum results, use conventional 75 to 90 g/m2 (20 to 24 lb) photocopy paper. Verify |
| that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, |
| wrinkles, curls, and bent edges. |
| The device supports a wide range of standard and custom sizes of print media. The capacity |
Note | |
| of trays and bins can vary depending on media weight and thickness and environmental |
| conditions. Use only transparencies that are designed for use with HP color LaserJet |
| printers. Inkjet and monochrome transparencies are not supported for this device. |
Tray 1 specifications
Media | Dimensions1 | Weight | Capacity2 |
Paper | Minimum: 76 by 127 mm (3 | 60 to 177 g/m2 (16 to 47 lb) | Up to 125 sheets of 75 g/m2 |
| by 5 inches) |
| (20 lb) paper |
| Maximum: 216 by 356 mm |
|
|
| (8.5 by 14 inches) |
|
|
Glossy paper | Same as the preceding |
| listed minimum and |
HP Cover paper3 | maximum sizes. |
| |
Transparencies and |
|
opaque film |
|
Labels4 |
|
Envelopes |
|
75 to 120 g/m2 (20 to 32 lb)
203 g/m2 (75 lb cover)
Thickness: 0.10 to 0.13 mm (3.9 to 5.1 mils)
Thickness: up to 0.23 mm (up to 9 mils)
Up to 90 g/m2 (16 to 24 lb)
Maximum stack height: 12 mm (0.47 inches)
50 (typically)
50(typically)
50(typically)
Up to 10
1The printer supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2Capacity can vary depending on media weight and thickness, and environmental conditions.
4Smoothness: 100 to 250 (Sheffield).
ENWW | Supported media weights and sizes 23 |