Epson TM-T88V, 2131885 user manual Specifications, When using USB/Ethernet/Wireless LAN Interface

When using USB/Ethernet/Wireless LAN Interface

DIP Switch Bank 1

SW	Function		ON	OFF
1-1	Auto line feed		Always	Always disabled
			enabled
1-2	Receive buffer		45 bytes	4KB
	capacity
1-3~		Undefined
1-8*1

*1: When using the USB interface on a model with a serial or parallel interface, the function of DIP switch 1-8 is as follows.

SW	Function	ON	OFF
1-8	Power saving function	Disabled	Enabled
	for USB

DIP Switch Bank 2

SW	Function	ON		OFF
2-1	Handshaking	Receive buffer		Offline or
	(BUSY condition)	full		Receive buffer
				full
2-2	Do not change	Fixed to OFF
	settings
2-3	Print density	See Table B
2-4
2-5	Release condition of	Releases BUSY		Releases BUSY
	receive buffer BUSY	when remaining		when remaining
	(If receive buffer	receive buffer		receive buffer
	capacity set to 4KB.)	capacity		capacity
		reaches		reaches
		138 bytes.		256 bytes.
2-6	Do not change	Fixed to OFF
2-7	setting.
2-8	Do not change		*2
	setting.

*2: Whether DIP switch 2-8 is set to ON or OFF is dependent on the printer model.

Table B

Print density/low power	SW2-3	SW2-4
Print density “Normal”	OFF	OFF
Print density “Medium”	ON	OFF
Print density “Dark”	OFF	ON
Do not set	ON	ON

Specifications

	80 mm paper width	58 mm paper width*1
Printing method	Thermal line printing
Dot density	180 dpi ×180 dpi [dots per 25.4 mm {1"}]
Printing direction	Unidirectional with friction feed
Printing width	72 mm {2.83"}, 512 dot positions	50.8 mm {2.0"}, 360 dot positions
Characters per line	Font A: 42; Font B: 56	Font A: 30; Font B: 40
(default)
Character spacing	Font A: 0.28 mm {.01"} (2 dots), Font B: 0.28 mm {.01"} (2 dots)
(default)
Character size	Standard/Double-height/Double-width/Double-width and Double-height
	Font A: 1.41 × 3.39/1.41 × 6.77/2.82 × 3.39/2.82 × 6.77 mm
	Font B: 0.99 × 2.40/0.99 × 4.80/1.98 × 2.40/1.98 × 4.80 mm
Character structure	Font A (default): 12 × 24; Font B: 9 × 17 (including 2-dot horizontal spacing)
Number of characters	Alphanumeric characters: 95; International character sets: 18 sets
	Extended graphics: 128 × 43 pages (including user-defined page)
Printing speed	300 mm/s {11.8"/s} max.; 70.9 lps (4.23 mm {1/6"} feed)
	Ladder bar code and 2D code: 100 mm/s {2.4"/s}
	The above speed values are approximate.
	The values are when the printer prints with density “Normal” at 24 V and 25°C {77°F}
	Speed is adjusted automatically depending on the voltage applied and head
	temperature.

TM-T88V User’s Manual 17