6TM-T88V User’s Manual
English
Installing the Printer Horizontally or Vertically
You can install the printer horizontally on a flat surface (with the paper exit on
top) or vertically (with the paper exit at the front) by hanging it on a wall, using
the optional WH-10 hanging bracket set.
WARNING:
When hanging the printer on the wall with the hanging bracket set, be sure to
attach a connector cover to the printer.
Setting Up the Printer
To set up the printer, follow the steps below.
1. Connect the cables.
2. Attach the connector cover.
3. Arrange the cables.
4. Install the roll paper.
Connecting the Cables
CAUTION:
For a serial interface, use a null modem cable.
For a parallel interface, use an IEEE 1284 cable.
For a USB interface, do not turn on the printer before installing the printer driver.
1. Make sure the printer is turned off.
2. Connect the power cord and each interface cable to the connectors on the
printer back. For the shape of each connector, see the illustration below.
(Mounted interfaces vary by the printer model.)
3. Connect the interface cable to the computer.
4. Insert the power cord plug into a socket.
㩷
RS-232 IEEE1284
10BASE-T/
100BASE-TX
DK
DC24V USB