Cleaning the device
Note
CAUTION
The section contains information about cleaning the device.
To clean the exterior
Use a soft, damp,
To clean the scanner glass
Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the accuracy of special features such as
If streaks or other defects appear only on copies produced using the automatic document feeder (ADF), clean the scanner strip (step 3). It is not necessary to clean the scanner glass.
1.Turn off the device, unplug the power cord from the electrical socket, and raise the lid.
2.Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the device; these can damage the device. Do not place liquids directly on the glass. They might seep under it and damage the device.
3.Clean the scanner strip by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
4. To prevent spotting, dry the glass by using a chamois or cellulose sponge.
To clean the lid backing
Minor debris can accumulate on the white document lid backing that is located underneath the device lid.
1. Turn off the device, unplug the power cord from the electrical socket, and raise the lid.
192 Chapter 12 Managing the device and maintenance | ENWW |
