Insert the air cleaner in the door (Figure 7-5), position the retaining frame over the air cleaner and push the tabs down into the tab slots to hold the air cleaner and frame to the door.

Insert the hinge tabs on the door into the slots in the projector body and swing the door down. Push on the handle to fully engage the door latch and then tighten the retaining screws to secure the door. (Figure 7-6).

Note

The air cleaner door must be closed and latched or power to the lamp will be shut off and the LAMP indicator will come on.

Tab Slot

Figure 7-5. Insert Frame and Air Cleaner

Slot

Hinge Tab

Figure 7-6. Insert Door and Close Tightly

3M 1996

3M

Multimedia Projector MP8030

23

 

 

Page 26
Image 26
3M MP8030 manual Insert Frame and Air Cleaner