Lubricating the Drive Pawls, Above procedure

	MAINTENANCE (Continued)
	Lubricating the Drive Pawls
	•Support the rear wheels off the ground.
	•Remove the rear hubcaps and wheel plugs (refer figure 30).
	•Inspect the inside of the wheel hub through the wheel plug hole. If dirt is found, the wheel should be removed and
	cleaned.
	•To remove the wheel, remove the ratchet plate securing the wheel to the axle.
	•Withdraw the wheel from the axle and clean out thoroughly.
	•Using clean engine oil, apply a few drops of oil to the end of the drive gear above the retaining washer and
	rotate the gear to allow the oil to penetrate (refer figure 31). The gear should rotate freely, if not, repeat the	30
	above procedure.	30
	above procedure.

•Replace the wheel, washer and secure with a new ratchet plate.

•If the wheel hub is clean, rotate the wheel until the drive gear is visible through the wheel plug hole.

•Using clean engine oil, apply a few drops of oil to the end of the drive gear (as above) and rotate the wheel one or two times to allow the oil to penetrate. The wheel should rotate freely, if not repeat the procedure (refer figure 31).

•Replace the wheel plugs and the hubcaps.

•Use a thin bladed screwdriver or similar between the hubcap and the wheel to prise off the hubcap, being careful not to over bend it.

•Ratchet plates require special tools to remove and replace them. If you are unsure, contact

your nearest authorized Rover dealer.
• Purchase new ratchet plates before removing the wheels as they are not reusable.	31

POWERSTART OPTION

N.B. The battery maintenance details are covered in the setting up section and the following matrix.

• Refer to the “Warning” and “Caution” notes at the beginning of this section.

CAUTION

Keep battery fully charged to ensure maximum service life.

Mower cleaning using optional washport

•Place the mower outdoors on a flat surface.

•Set the cut height to high cut position.

•With the engine stopped connect a garden hose with a snap on connection ( remove the cap first), to the washport fitted to the inside face of the cutting chamber. (refer figure 32.)

•Turn the garden hose on.

•Return to the mower and start the engine and run at full speed for 1 minute.

•Stop the engine and turn off the garden hose.

•Remove the garden hose from the washport and replace the cap.

•Inspect the underside of the mower, if not completely clean use the garden hose to flush out the remaining debris.

™

ENGLISH

Powered Walk Behind Mower - CE

Part No. 04016218 Rev G

80, 51 specifications

Rover 51,80 is a full-size luxury SUV that has garnered attention for its blend of performance, comfort, and advanced technology. This model showcases Rover's ability to merge traditional craftsmanship with modern amenities, providing a driving experience that appeals to a wide range of consumers.

One of the standout features of the Rover 51,80 is its robust powertrain. It typically comes with a variety of engine options, ranging from efficient diesel variants to powerful petrol engines. The engines are mated to a sophisticated automatic transmission system, offering smooth gear transitions that enhance driving comfort. The AWD system ensures optimal traction and stability, making it suitable for various road conditions, whether urban landscapes or rugged terrains.

Inside the Rover 51,80, luxury takes center stage. High-quality materials like premium leather and polished wood accents create an upscale atmosphere, while seats are ergonomically designed for maximum comfort during long journeys. The spacious cabin provides ample legroom and cargo space, catering to families and adventure seekers alike.

Technology is a focal point of the Rover 51,80. It features an advanced infotainment system equipped with a large touchscreen interface, which allows seamless access to navigation, media, and vehicle settings. The sound system is often designed in collaboration with top audio brands, providing an immersive listening experience. Additionally, connectivity options such as Apple CarPlay and Android Auto ensure that drivers can integrate their devices effortlessly.

Safety is paramount for Rover, and the 51,80 comes with a suite of advanced safety features designed to protect both occupants and pedestrians. These may include adaptive cruise control, lane-keeping assistance, and a comprehensive airbag system. The vehicle's robust framework also contributes to its high safety ratings.

Another characteristic that sets Rover 51,80 apart is its off-road capability. With adjustable air suspension and various terrain response settings, this SUV is adept at handling challenging landscapes while maintaining ride comfort. Whether tackling rocky trails or navigating snowy streets, the 51,80 proves itself as a versatile vehicle.

In summary, Rover 51,80 encapsulates a harmonious blend of luxury, performance, and technology. Its powerful engine options, luxurious interior, advanced safety features, and off-road prowess make it a compelling choice for those seeking a premium SUV that delivers on multiple fronts.

Rover 80 Lubricating the Drive Pawls, Above procedure, Replace the wheel plugs and the hubcaps

Models: 80 51

MAINTENANCE (Continued)