3Setting the FlashN

External Speedlite Custom Function Settings

For details on the external Speedlite’s Custom Functions, refer to the Speedlite’s instruction manual.

1Select [External flash C.Fn setting].

Select [External flash C.Fn setting], then press <0>.

2

Clear Settings

1

2

Set the desired function.

Press the <U> key to select the number, then press <0>.

Select the setting, then press <0>.

Select [Clear settings].

Select [Clear settings], then press <0>.

Select the settings to be cleared.

Select [Clear built-in flash set.],

[Clear external flash set.], or [Clear ext. flash C.Fn set.], then press <0>.

When you select [OK], the respective flash settings or all the Custom Function settings will be cleared.

With an EX-series Speedlite, if the [Flash metering mode] Custom Function is set to [TTL] (autoflash), the Speedlite will always fire at full output.

The Speedlite’s Personal Functions (P.Fn) cannot be set or canceled with the camera’s [Flash control] screen. Set it with the Speedlite.

202