kShooting Movies

Notes on Movie Shooting

You can use Remote Controller RC-6 (sold separately, p.184) to start and stop the movie shooting if the drive mode is <Q> or <k>. Set the shooting timing switch to <2> (2-sec. delay), then press the transmit button. If the switch is set to <o> (immediate shooting), still photo shooting will take effect.

With a fully-charged Battery Pack LP-E6, the total movie shooting time will be approx. 1 hr. 20 min. at room temperature (23°C / 73°F) and at low temperatures (0°C / 32°F).

The focus preset function is possible for movie shooting when using a (super) telephoto lens equipped with the focus preset mode, available since the second half of 2011.

Final Image Simulation

The final image simulation is a function that allows you to see the effects of the Picture Style, white balance, etc., on the image. During movie shooting, the image displayed will automatically reflect the effects of the settings listed below.

Final Image Simulation for Movie Shooting

Picture Style

*All settings such as sharpness, contrast, color saturation, and color tone will be reflected.

White balance

White balance correction

Exposure

Depth of field

Auto Lighting Optimizer

Peripheral illumination correction

Chromatic aberration correction

Highlight tone priority

260