Fully Automatic Shooting with One External Speedlite and
This section describes fully automatic wireless flash shooting with one external Speedlite and the
You can change the flash ratio between the external Speedlite and
On the menu screens, the <0> and <1> icons refer to the external Speedlite, and the <3> and <2> icons refer to the
1 2
Select [CustWireless].
Follow step 5 on page 232 to select [CustWireless], then press <0>.
Select [Wireless func.].
Under [Wireless func.], select [0:3], then press <0>.
3Set the desired flash ratio and take the picture.
Select [0:3] and set the flash ratio within 8:1 to 1:1. Setting a flash ratio to the right of 1:1 is not possible.
If the
The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops
234