Choosing Images Individually

1Choose [Select].

zzFollowing step 2 in “Using the Menu” (=75), choose [Select] and press the <m> button.

2Choose an image.

zzPress the <q><r> buttons or turn the <5> dial to choose an image, and then press the <m> button. [] is displayed.

zzTo cancel selection, press the <m> button again. [] is no longer displayed.

zzRepeat this process to specify other images.

3Protect the image. zzPress the <n> button. A

confirmation message is displayed.

zzPress the <q><r> buttons or turn the <5> dial to choose [OK], and then press the <m> button.

•Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

Selecting a Range

1Choose [Select Range]. zzFollowing step 2 in “Using the Menu”

(=75), choose [Select Range] and press the <m> button.

2Choose a starting image. zzPress the <m> button.

zzPress the <q><r> buttons or turn the <5> dial to choose an image, and then press the <m> button.

3Choose an ending image. zzPress the <r> button to choose [Last

image], and then press the <m> button.

Cover

Before Use

Common Camera Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Auto Mode

3

Other Shooting

Modes

4

P Mode

5 ModeTv, Av, and M

6

Playback Mode

7

Setting Menu

8

Accessories

9

Appendix

Index

76