3Turn the TV on and switch to video input.
zzSwitch the TV input to the video input you
connected the cable to in step 2.
4 Turn the camera on.
zzPress the <1> button to turn the camera on.
zzImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zzWhen finished, turn off the camera and TV before disconnecting the cable.
•Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the video output format, press the <n> button and choose [Video System] on the [3] tab.
Still Images | Movies |
Powering the camera with AC Adapter Kit
1Make sure the camera is off.
2 Insert the coupler.
zzFollow step 2 in “Inserting the Battery Pack and Memory Card” (=13) to
open the cover.
zzInsert the coupler facing the direction
shown, just as you would a battery pack
(following step 3 in “Inserting the Battery
Pack and Memory Card” (=13)).
zzFollow step 5 in “Inserting the Battery
TerminalsPack and Memory Card” (=13) to close the cover.
3 Connect the adapter to the camera.
zzOpen the cover and insert the adapter plug fully into the camera.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode |
3 | Other Shooting |
Modes | |
4 | P Mode |
5 ModeTv, Av, and M | |
6 | Playback Mode |
7 | Setting Menu |
8 | Accessories |
9 | Appendix |
Index
99