Samsung Q46, HTQ45 Changing the Boot Priority, Press <Enter> on the Boot Device Priority item

Changing the Boot Priority

The default boot priority of your computer is the CD-ROM first, then a removable device and then the hard disk drive in this order.

By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below.

1	Select the Boot menu in the BIOS Setup.	Press the down key (↓) to move to the IDE HDD
		3 itemand press the F6 key to move up to the top item.

2				Boot Device Priority
	Press <Enter> on the Boot Device Priority item.			Boot priority order:
				▼ IDE CD : xxxxxxxxxxxxxxxxxxx
				▼ IDE HDD : SAMSUNG xxxxxxx
				▼ USB KEY : Not Installed
				▼ USB CDROM : Not Installed
				▼ USB FDC : Not Installed
	Boot Device Priority			▼ USB HDD : Not Installed
	NumLock	[Off]	Select system boot	▼ PCI BEV : Not Installed
	Enable Keypad	[By NumLock]		▼
			options
	Summary screen	[Disabled]
	Boor-time Diagnostic Screen	[Disabled]		Excluded from boot order:
	PXE OPROM	[Only with F12]
	Brightness Mode Control	[Auto]		▼ USB ZIP : Not Installed
	Wireless Device Control	[Always On]
				▼ USB LS120 : Not Installed
	Smart Battery Calibration
				Press the F10 key to save the settings and exit
				4 Setup. The highest boot priority device is now set to
				the Hard Drive.

134