Changing Shooting Functions

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for L size or postcard size prints.

Select [Disp. Overlay], then press the qr buttons to select an option.

Grid Lines

A grid overlays the display.

 

Gray areas appear at the top and

3:2 Guide

bottom of the screen. These areas

will not print when printing on 3:2

 

 

aspect ratio paper.

Both

Both grid lines, and the 3:2 guide will

display.

 

In mode, you cannot set [3:2 Guide] or [Both].

Grid Lines will not be recorded on the image.

The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.

Changing the IS-Mode Settings

Select [IS Mode], then press the qrbuttons to select an option.

 

Image stabilization is always on. You

Continuous

can confirm the result directly on the

display, which makes it easier to

 

 

check the composition or focus.

 

 

Shoot Only

Image stabilization is only active at

the moment of shooting.

 

 

Image stabilization only counters up

Panning

and down motion. This option is

recommended for shooting objects

 

 

moving horizontally.

If camera shake is too strong, attach the camera to a tripod. It is

recommended to set the IS Mode to [Off] when the camera is fixed to a tripod.

When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically.

111