You will hear a start-up sound and see the start-up image when the power comes on. (To change the start- up sound and image, see below and pages 52 and 181.)

The start-up image does not appear when the LCD

monitor is off or the terminal is connected to a TV.

Turning on the camera without the start-up sound and image

Press and hold the button, then turn on the power.

Power-saving Function

When the camera’s power-saving function is turned on and it activates, restore power by pressing the ON/OFF button.

Shooting Mode

The power will automatically shut off approximately 3 minutes after the last function is accessed. Even if the power-saving function is turned off, the LCD monitor will shut off approximately 3 minutes after the last function is accessed. Press any button other than the ON/OFF button to restore the LCD monitor.

Replay Mode

The power will automatically shut off approximately 5 minutes after the last function is accessed.

While Connected to a Printer

The power will automatically shut off approximately 5 minutes after the last camera function is accessed or printer (sold separately) ceases to print an image.

The power-saving function will not activate while the camera is in auto play mode or during a computer connection (p. 130, 167).

You can turn off the power-saving function in the [ (Set up)] menu (p. 178).

Preparing the Camera, Basic Functions

31