2Shoot the image.

•The shutter speed and aperture value will automatically appear on the LCD monitor if it is on.

•The correct exposure has been set if the shutter speed and aperture value show in white.

• For functions available in this mode, see page 224.

• If a correct exposure cannot be obtained, the shutter speed and aperture value show in red on the LCD monitor. Use the following methods to obtain the correct exposure and make them show in white.

-Use the flash.

-Change the ISO speed setting.

-Change the light metering mode.

Differences and Similarities between the and Modes.

•Both modes automatically select the shutter speed and aperture value.

•The following settings can be adjusted in mode, but

not in

mode.

 

- Exposure Compensation

- White Balance

- ISO Speed

- Flash (Flash on)

- Photo Effects

- Continuous Shooting

- Light Metering Mode

- Manual Focus

- Auto Focus

•For the correlation between aperture value and shutter speed, see page 93.

90