62

Setting the Camera to the Color Accent

Mode
Colors other than the color specified in the LCD monitor are
shot in black and white.
1 (Color Accent) .
See Menus and Settings (p.22).
zThe camera will switch to color
input mode and the display will
alternate between the original
image and the color accent
image (using the previously set
color).
2Aim the camera so that the color you

wish to retain appears at the center of

the LCD monitor and press the button.

zOnly one color can be specified.
zYou can use the or button to specify the range
of colors that are retained.
3.
zThis completes the setting.
zIf you press the MENU button at this point, you will
return to the screen where you can select a My Colors
mode.
–5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to
retain.
zThe default color accent is green.
zYou may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
zThe specified color accent is retained even if the
camera’s power is turned off.