Canon A620 appendix Turn on the TV and switch it to Video mode, Turn on the camera, On a TV set

Viewing Images on a TV set

You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable.

1 Turn off the Camera and the TV.

2 Connect the AV cable to the camera’s A/V OUT terminal.

zOpen the terminal cover by slipping a fingernail under the left edge and plug the AV cable in all the way.

3 Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV.

VIDEO AUDIO

Yellow

IN

Black

Viewing Images

4	Turn on the TV and switch it to Video mode.
5	Turn on the camera.

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 27). The default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others

If the video system is set incorrectly, the camera output may not display properly.

on a TV set

89