Canon A620 appendix Setting the Aperture, Safety Shift, Aperture Value Display

Setting the Aperture

Shooting Mode

The aperture adjusts the amount of light entering through the lens. When you set the aperture value, the camera automatically selects a shutter speed to match the brightness.

Selecting a lower aperture value (opening the aperture) allows you to blur the background and create a beautiful portrait. A higher aperture value (closing it) brings the entire range from foreground to background into focus. The larger the aperture value, the greater the range of the image brought into clear focus.

zIf the shutter speed is shown in red, the image is underexposed (insufficient light) or overexposed (too much

light). Adjust the aperture value using the or button until the shutter speed display turns to white.

zSome aperture values may not be available with certain zoom positions (p. 42).

In this mode, the shutter speed range with synchronized flash is 1/60 second to 1/500 second. The aperture value setting may therefore be changed automatically to match the synchronized flash speed even if its value was set previously.

Aperture Value Display

zThe larger the aperture value, the smaller the lens aperture. F2.8 F3.2 F3.5 F4.0 F4.1 F4.5 F5.0 F5.6 F6.3 F7.1 F8.0*

*In , an aperture value of F11 at max. wide angle and of F16 at max. telephoto may be possible depending on the shooting conditions.

zYou can change the combinations of shutter speeds and aperture values without altering the exposure (p. 50).

Shooting

Safety Shift

When and modes, if [Safety Shift] is set to [On] in the Rec. menu, the shutter speed or aperture value is automatically adjusted for the correct exposure when it cannot be otherwise obtained. The safety shift function does not work when the flash fires.

43