Printing stopped midway.
The printer is not correctly z Connect the cable correctly (p. 31). connected to the camera.
The printer’s power button lights red without the camera’s LCD monitor displaying any error message.
There is a malfunction in the printer.
zRemove the paper from the
Print quality is not good.
You are not using the correct z Use the designated paper type. paper type.
Paper is loaded with the z Load the paper correctly (p. 28). wrong side up.
The ink sheet or paper is z Use a clean ink sheet and clean paper. dirty.
Condensation has formed z Wait for condensation to evaporate (p. 15). inside the printer.
Printed images are distorted.
The printer is too close to a z Move the printer so that it is at least 1 meter (3.3 ft.) away
TV, video game machine, or from the electromagnetic source. other electromagnetic
source.
The printer is too close to a z Move the printer away from the strong magnetic source. stereo speaker, large motor,
or other strong magnetic source.
There is not enough ink left for the allotted sheets in the set.
You turned the printer’s | z Please avoid turning the printer’s power on and off |
power on and off repeatedly. | needlessly. |
|
|
You pulled on the ink sheet. | z Do not pull on the ink sheet by force. |
|
|
You tore or bent the paper’s | z Do not tear or bend the paper’s perforated edges. |
perforated edges before |
|
printing. |
|
|
|
You removed the ink | z Load paper into the paper cassette without removing the |
cassette when paper run out | ink cassette. |
while the printer was printing |
|
more than one sheet of |
|
paper. |
|
|
|
Nothing happens when the camera’s 
, 
or SET button is pressed.
The printer has overheated. z Wait for the printer to cool down.
Printing is in progress. z Wait for the printer to finish printing.
59