2 Safety

Environment of use

• Use, store, and transport the CR-2 in an environment that is within the range of the following conditions.

 

Temperature

Humidity

Atmospheric pressure

Environment of use

10 to 35°C

30 to 90% RH (no

800 to 1060 hPa

 

 

condensation)

 

Storage and transportation

–30 to 60°C

10 to 60% RH (no

700 to 1060 hPa

environment

 

condensation)

 

 

 

 

 

• Do not install, store, or leave the CR-2 in a very hot or humid environment. Also, do not use the CR-2 outside. Doing so may cause a malfunction or misoperation.

• Always try to keep the room as clean as possible. After many years of usage, airborne dust in the room may get on the objective lens as well as the optical parts in the main unit. You cannot take good images if dust is on the equipment.

• When the CR-2 is not being used, attach the objective lens cap and place the dust cover over the CR-2.

Installation

•Ask the Canon representative or distributor from whom you purchased the CR-2 to install it.

•A strong shock to the CR-2 may put it out of alignment. Please handle it carefully.

Transportation

•Lower the main unit and chin rest to the bottom. To automatically lower them, turn on the power while holding down the set button.

•Be sure to turn off the CR-2's power switch, remove the AC plug from the outlet, and disconnect any cables connected to other equipment.

•Align the stage with the base, and then lock the stage with the stage lock lever.

•Carry the CR-2 by the indentations for lifting at its front and rear, and keep it level.

•Do not hold the face rest or digital camera when lifting the main unit.

•The CR-2 needs to be protected from vibration and shocks when it is transported in a vehicle or over long distances. For details, contact the Canon representative or distributor from whom you purchased the CR-2.

14