4 Basic Operations

Connecting Cables

Connect the CR-2 to a computer in which the Rics NM 2, the supplied software, has been installed.

WARNING

• Do not plug or unplug the power plug with wet hands.

•Do not use any power cord other than the supplied. Otherwise, fire or electric shock may result.

1

Make sure that the power switch for the CR-2 is turned off.

2

Connect the power cord and the USB cable to the

 

retinal camera.

3

Insert the power plug all the way into an AC outlet.

4

Connect the other end of the USB cable to the USB connector of the PC.

Use a high-speed AB type USB cable that is 3 meters or shorter. For details, contact the Canon representative or distributor from whom you purchased the CR-2.

Preparing for an Examination

CAUTION

• To prevent the risk of infection, wipe the forehead rest with ethanol solution or any other

 

disinfectant whenever changing patients. For details on how to disinfect, consult a specialist.

 

• To ensure cleanliness, replace the chin rest paper whenever the patient is changed.

1

Turn on the computer and start the Rics NM 2.

2

If the digital camera is off, turn the switch to the ON or

 

position.

22