Canon D20, 6145B001 Save the GPS log files to the memory card

Using GPS Function

Save the GPS log files to the memory card.

When you turn off the camera, a message about the logger is displayed. The location information, date and time will be saved to the memory card. This information will not remain on the camera.

If the camera is off and you want to remove the memory card when the logger is being used, turn the camera on, then turn it off again before removing the memory card. The location information, date and time will be saved to the memory card when you do any of the following things.

-Display the log files

-Display the date/time setting screen -Display the time zone setting screen

•Removing the battery after step 4 will deactivate the logger. To

reactivate the logger after battery replacement, turn the camera on and then off again.

•Saving GPS log files is not possible when the memory card write- protect tab is in the locked position. Make sure the tab is set to the unlocked side.

•Location information, date and time will be saved to the memory card when the camera is turned off or when displaying log files (p. 51). For this reason, if the camera is off and you want to remove the memory card when the logger is being used, turn the camera on, then turn it off again before removing the memory card.

•When using the logger function, exercise caution when turning the camera over to another person, as the date and time, and logged location information will remain on the camera until it is saved to a memory card (even if the battery is depleted).

•Be careful when formatting memory cards (p. 157), because the GPS log file will also be erased.

•You can also configure logger settings from the menu (p. 42).

50