Recording Still Images

To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand ( 11).

To change the operating mode, refer to About the Operating Modes ( 11).

1. Open the LCD panel and the lens cover (move the lens cover switch down to ).

2.Press Start/Stop halfway.

Once the focus is automatically adjusted,

will turn green and one or more AF frames appear.

3. Press Start/Stop fully.

The DISC access indicator will flash as the image is being recorded.

Avoid the following actions while the disc access display appears and while the DISC access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not subject the camcorder to vibrations or strong impacts.

-Do not open the disc cover and do not remove the disc.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the operating mode.

If the subject is not suitable for autofocus, turns yellow. Keep Start/Stop pressed halfway and adjust the focus manually with the multi selector ( ).

26