Deleting Scenes
You can delete those scenes that you are not interested in keeping. Remember that when |
|
you delete scenes in the playlist, you do not affect your original recordings; However, | E |
when you delete an original recording, it will be deleted also from the playlist. |
Be careful when deleting original recordings. Once deleted, an original scene cannot be recovered.
Do not change the operating mode while the scene is being deleted.
Scenes cannot be deleted when the disc is protected (
57).
You may not be able to delete scenes shorter than 5 seconds.
Deleting a Single Scene
To change the operating mode, refer to About the Operating Modes (
11). Disc type: 
From the original index screen, select (
,
) the scene to delete. To delete a scene only in the playlist, press PLAYLIST first, and then select the scene.
FUNC. 
DELETE
YES
Deleting a Scene Just After Recording
As long as you have not turned the camcorder off or changed the operating mode after recording a scene, you can delete it while reviewing it.
To change the operating mode, refer to About the Operating Modes (
11). Disc type: 
1. Immediately after recording a scene, press 
(record review).
2.While reviewing the scene, select (
) 
and press (
).
3.Select (
) [YES] and press (
).
Deleting All Scenes
To change the operating mode, refer to About the Operating Modes (
11). Disc type: 
To delete all the scenes from the original index screen follow the procedure below. This will delete also the whole playlist. If you only want to delete all the scenes from the playlist (without affecting the original recordings), press PLAYLIST first and then continue as follows.
Scenes the Editing | Functions Editing |
only) mode VR in |
|
55