
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists.
Power Source
ProblemSolution
• Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery | 17 |
•The camcorder switches off pack. by itself.
•The disc compartment
cover will not open. | Attach the battery pack correctly. |
|
•LCD/viewfinder switches on and off.
Battery pack will not charge. | Charge the battery pack in temperatures between 0 °C and | – |
| 40 °C (32 °F and 104 °F). |
|
| Battery packs become hot with use and may not charge. The | – |
| charging will start once the battery pack temperature is below |
|
| 40 °C (104 °F). |
|
| The battery pack is damaged. Use a different battery pack. | – |
Recording/Playback
|
|
| Problem | Solution |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
Buttons will not work. | Turn on the camcorder. |
| – | |||||
|
|
|
| Load a disc. | 22 |
| ||
Abnormal characters appear | Disconnect the power source and reconnect it after a short |
| – | |||||
on the screen. The camcorder | time. If the problem still persists, disconnect the power source |
|
|
|
| |||
does not operate properly. | and press the RESET button with a pointed item. Pressing the |
|
|
|
| |||
|
|
|
| RESET button resets all settings. |
|
|
|
|
“ |
|
| ” flashes on the screen. | Load a disc. | 22 |
| ||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
“ |
| ” flashes on the screen. | Battery pack is exhausted. Replace or charge the battery | 17 |
| |||
|
| |||||||
|
|
|
| pack. |
|
|
|
|
Video noise appears on | When using the camcorder in a room where a plasma TV is |
| – | |||||
screen. | located, keep a distance between the camcorder and the |
|
|
|
| |||
|
|
|
| plasma TV. |
|
|
|
|
Video noise appears on the | When using the camcorder in a room where a TV is located, |
| – | |||||
TV screen. | keep a distance between the compact power adapter and the |
|
|
|
| |||
|
|
|
| power or antenna cables of the TV. |
|
|
|
|
Even without a disc loaded, | The camcorder is checking if a disc is loaded or not. This is not |
| – | |||||
when closing the disc | a malfunction. |
|
|
|
| |||
compartment cover a motor |
|
|
|
|
| |||
sound can be heard. |
|
|
|
|
| |||
The disc cannot be ejected. | Turn off the camcorder, disconnect the compact power |
| – | |||||
|
|
|
| adapter and remove the battery pack. Restore the power |
|
|
|
|
|
|
|
| supply and try again. |
|
|
|
|
|
|
|
| The camcorder has exceeded its operational temperature. |
|
|
|
|
|
|
|
| Disconnect the compact power adapter and remove the |
|
|
|
|
|
|
|
| battery pack and let the camcorder cool down before resuming |
|
|
|
|
|
|
|
| use. |
|
|
|
|
The disc cannot be | The disc is dirty. Clean the disc with a soft | 72 |
| |||||
recognized. | If the problem persists replace the disc. |
|
|
|
| |||
|
|
|
| The disc is not correctly loaded. Check the disc. | 22 |
| ||
The camcorder vibrates. | Depending on the condition of the disc, the camcorder might |
| – | |||||
|
|
|
| vibrate occasionally. This is not a malfunction. |
|
|
|
|
66