Canon DC50 Direct Print Related Messages, Message, Explanation, MessageExplanation

Trouble? 103

MessageExplanation

TOO MANY STILL IMAGES	Disconnect the USB cable and decrease the number of still images	–
DISCONNECT USB CABLE	on the memory card or disc to less than 1800. Images cannot be
	erased from a DVD-R/DVD-R DL or DVD-RW disc recorded in
	VIDEO mode.
	If a dialog appeared on the computer screen, close it and then
	reconnect the USB cable.
COPYRIGHT PROTECTED	You attempted to record copyright-protected contents.	80
DUBBING RESTRICTED	May also appear when an anomalous signal is received while
	recording form the analog video input.

Direct Print Related Messages

NOTES

About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual.

Message	Explanation
PAPER ERROR	There is a problem with the paper. The paper is not correctly loaded or the
	paper size is wrong.
	Alternatively, if the paper output tray is closed, open it to print.
NO PAPER	Paper is not correctly inserted or there is no paper.
PAPER JAM	The paper jammed during printing. Select [STOP] to cancel printing. After
	removing the paper, set some paper again and retry printing.
INK ERROR	There is a problem with the ink.
NO INK	The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL	The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
	printing.
INK ABSORBER FULL	Select [CONTINUE] to resume printing. Consult a Canon Service Center
	(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR	You attempted to print an image that was recorded with another
• CANNOT PRINT!	camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X	You attempted to use the print order settings to print X images that were
IMAGES	recorded with another camcorder, with a different compression or were
	edited on a computer.
SET PRINT ORDER	No still image on the memory card has been marked with a print order.
PRINT ORDER ERROR	You attempted to set more than 998 still images in the print order.
CANNOT TRIM	You attempted to trim an image that was recorded with another camcorder.
READJUST TRIMMING	You changed the print style after you set the trimming settings.
PRINTER ERROR	Cancel printing. Turn off the printer and turn it back on. Check the printer
	status. If the error still persists, refer to the printer’s instruction manual and
	contact the appropriate customer support center or service center.

Information Additional