Depending on the recording, you might occasionally notice a brief stop of the picture or sound at the point where the scene changes.

Displaying the Photos

( 10)

1Move the power switch to ON, then slide it down toward MODE and release it to set the camcorder in PLAY mode.

The green PLAY indicator will turn on.

2Move the / switch to the (Still images) position.

3If necessary, change the media for the still images.

Refer to Selecting the Media for the Photos ( 35).

Playback 39

4Use the joystick ( ) to move between images.

IMPORTANT

The following may not be displayed correctly.

-Images not recorded with this camcorder.

-Images edited on or uploaded from a computer.

-Images whose file names have been changed.

Avoid the following actions while the disc/card

access display ( or ) appears on screen, and when either the DISC access or CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not subject the camcorder to vibrations or strong impacts.

-Do not open the disc cover or the memory card slot cover and do not remove the disc or memory card.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the / switch or the operating mode.

Slideshow

SLIDESHOW

FUNC.

( 29)

1 Press FUNC. .

2Select () [ SLIDESHOW] and press ().

3Select ( ) [START] and press ( ).

Images are played back one after another.

Press FUNC. to stop the slideshow.

Index Screen

1Move the zoom lever toward W.

The still images index screen appears.

2Select (, ) an image.

Functions Basic