
Printing after Changing the Print Settings
1If the joystick guide does not appear on screen, press () to display it.
2Push the joystick () toward
.
•The print settings menu appears.
•Depending on the printer, the message “BUSY” may appear before the camcorder displays the print settings menu.
3In the print settings menu, select(






.
•Printing starts. The print settings menu disappears when the printing is completed.
•To continue printing, select another still image.
TO CANCEL THE PRINTING
Press while printing. A confirmation dialog
appears. Select [OK] and press . With Canon’s PictBridge compatible printers, the printing will stop immediately (even if not completed) and the paper will be fed through.
Connecting to a Printer 93
PRINTING ERRORS
If an error occurs during the printing process, an error message appears ( 103).
-Canon’s PictBridge compatible printers: Resolve the error. When printing does not resume automatically, select [CONTINUE] and
press . If [CONTINUE] cannot be selected,
select [STOP], press and retry printing. Refer also to the printer’s instruction manual for details.
-If the error still persists and printing does not restart, disconnect the USB cable and turn off the camcorder and the printer. After a short
while, turn them on again, set the camcorder to
mode and restore the connection.
WHEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder and printer and turn off the camcorder.
IMPORTANT
The following still images may not be correctly printed with a PictBridge compatible printer.
-Images created or changed on a computer and transferred to the memory card.
-Images recorded with the camcorder but edited on a computer.
-Images whose file names were changed.
-Images copied from the memory card to the disc.
-Images not recorded with this camcorder. Observe the following precautions during
printing:
-Do not turn off the camcorder or the printer.
-Do not change the position of the /
switch.
-Do not disconnect the USB cable.
- Do not remove the disc or memory card.
If the message “BUSY” does not disappear,
disconnect the USB cable and restore the External connection after a short while.
Connections