Canon DR-2020U Scanner Operation Settings, Opening the Scanner Properties Screen

Scanner Operation Settings		2	Select [CANON DR-2020U USB], and then click
You can specify the wait time before the scanner enters the sleep			[Properties].
mode and specify whether to turn the scanner ON and OFF			Hint
automatically when the computer is turned ON and OFF.
			• If the scanner does not appear in the list, check that the scanner
To configure these settings, open the Scanner Properties screen.
			is turned ON and connected to the computer, and then click
Opening the Scanner Properties Screen			[Update].
			• In Windows Vista, the [User Account Control] screen appears.
The instructions shown are when you are using the Windows Vista
			If you are logged on as an administrator, click [OK]. If you are
operating system.
			not logged on as an administrator, enter the password of a user
			that has administrator privileges, and then click [OK].
1 Click [Start], [All Programs], and [Canon DR-2020U], then
	click [Utility].

The Canon DR-2020U USB Properties screen appears.

Canon imageFORMULA Utility starts.

The following section describes the setting items for the tabs in the

Cannon DR-2020U USB Properties screen.

58