Names and Functions of Parts
This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the
■Back View
scanner before using the scanner.
■ Front
Document Feed | Job Buttons |
Tray | These buttons can |
Open to place | perform user- |
documents. | specified functions |
| assigned with the |
| CaptureOnTouch. |
| Power Indicator |
Document Eject Area | This indicator lights |
green when the | |
Scanned documents | scanner is turned |
are output here. | ON. |
Power Switch
This switch is used to turn the scanner ON and OFF. If you set the switch to [AUTO], the scanner is linked to be automatically turned ON/OFF in accordance with the power of the computer.
Power Connector Connect the supplied AC adapter to this connector.
USB Connector Connect a USB cable that supports
Theft Prevention Hole (Kensington)
Attach a key chain, etc. here to prevent the scanner from being stolen.
■Front View (With the Document Feed Tray and Eject Tray Open)
■Feed Selection Lever
Front Unit
Open when clearing paper jams and cleaning the scanner.
OPEN button Use to open the front unit.
Extension Tray
Pull this tray out if the document hangs over the edge of the document eject tray.
Document Feeder Place the document to scan here.
Document Guides Adjust these guides to fit the width of the document.
Document Eject Tray
Open this tray when you want to stack output documents.
Feed Selection Lever
Use this lever to change the way documents are fed. Push it up to feed documents one at a time (page separation mode). Push it down to feed documents that are fastened together, such as invoices, without separating them (bypass mode).
■Paper Eject Stopper
Paper Eject Stopper
Use the paper eject stopper that corresponds to the length of the documents you want to scan.
8