Setup Guide | Please read first. |
|
|
Although this manual uses the
Installing the Feed Roller
1 | Slide the document guides to the left | 2 | Lift the roller fixing lever a, and slide it to the left b. |
and right, and open the roller cover. |
| ||
| Document |
|
|
Checking the Accessories
If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative.
•Items included in this manual are subject to change without notice.
•You must keep the machine’s packaging and packing materials for storing or transporting the machine.
guides | Roller fixing lever |
|
Roller cover
Feed Roller | USB Cable Type A/Type B | AC Adapter/Power Cord | |||||||||
|
|
|
|
|
|
|
| (Length: 1.8 m) | (Connected length: 2.6 m) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reference Guide | Registration Card | Warranty Card | Setup Disc |
(this document) | (U.S.A and Canada only) | (U.S.A and Canada only) |
|
3 | Insert the feeding roller and align the | 4 | Slide the roller fixing lever to the right and insert it into the hole on the left of |
notch on the roller with the shaft on | the feeding roller a. Lower the roller fixing lever to secure the shaft of the | ||
| the unit. |
| feeding roller b. |
The following software is included on the supplied Setup disc.
●Presto! BizCard
Business card management software from NewSoft Technology Corp. Run the following installer from the Setup disc to install.
➜ BizCard/BCRInstaller
●Presto! PageManager
Photo and document management software from NewSoft Technology Corp.
Run the following installer from the Setup disc to install. ➜ PageManager/PM8Installer
* Presto! BizCard is a registered trademark of NewSoft Technology Corp.
5 | Close the roller cover. It is properly | 6 | Gently press on the sides of the front |
closed when you hear a click. | unit to close it. It is properly closed |
when you hear a click.
Remove the scanner from the box, and remove the orange tape and protective sheets (▼) from the scanner.
☞Continued on back side