4 About Exposure

Setting the Exposure

When taking photographs using TTL metering, no exposure compensation is necessary to meter the light coming through the lens.

With TTL metering, AE (autoexposure) is possible at all focusing distances. Just set the desired picture-taking mode, then check the shutter speed and aperture before taking the picture.

Magnification and Effective f-number

The aperture displayed by the camera assumes that the focus is set to infinity. The actual aperture (effective f-number) becomes darker (effective f- number increases) at closer focusing distances (magnification increases). This does not cause exposure problems for normal picture-taking. However, for closeup photography, you cannot ignore the change in the effective f-number.

When you use a handheld exposure meter to set the exposure, you must take into account the exposure factor shown in the following table.

Magnification

 

 

1 : 5

1 : 4

1 : 3

1 : 2

1:1.5

1 : 1

 

 

 

 

 

 

 

 

 

 

Effective f/No.

 

 

3.50

3.66

3.89

4.39

4.86

5.84

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Exposure Factor

in

1

stops

+

1

 

+

1

 

+1

+1

 

+1

1

 

+2

2

2

 

2

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(stops)

in

1

stops

+

2

 

+

2

 

+1

+1

1

 

+1

2

 

+2

3

3

3

3

3

¡The correct exposure for a close-up shot largely depends on the subject. Therefore, it is recommended to take several shots of the same subject at different exposures.

¡When taking close-up shots, it is recommended to use aperture-priority AE (Av) or Manual (M) picture-taking modes, because depth of field and exposure are easy to adjust in those modes.

If your eye will not be covering the eyepiece when the picture is taken (with remote control operation, etc.), use the eyepiece shutter or eyepiece cover. This prevents stray light from entering the eyepiece and throwing off the proper exposure.

ENG-6