11. Hood | 12. Case |
The special hoods that come with all these lenses cut out unwanted light and protect the front of the lens from rain, snow, and dust.
Strap
Keyhole
Lid
Lever
To attach the hood, loosen the hood lock knob by turning it counterclockwise. Fit the hood onto the lens’s hood mount, and tighten the lock knob to fix it in place. Use the same procedure, in reverse, to remove the hood.
ut the lens away as follows.
Reverse the lens hood, slip it over the lens, and attach the lens cap.
Position the tripod mount straight upwards as shown and place it in the case.
Fasten the lens securely with the strap.
Push the lever while holding the lid from above to lock.