Canceling AEB, S R E Q modes | Canon ELAN7NE-30V, ELAN7NE-33V

Canceling AEB

•After the three bracketed shots are

taken, the AEB setting will not be canceled automatically. To cancel AEB, follow steps 1 and 2 to set the AEB amount to “Z”.

•AEB will also be canceled automatically if the flash is ready to fire.

AEB cannot be used with flash or bulb exposures.

• During AEB shooting, the <7> arrow will appear next to the <L> icon and the AEB level <x> will be displayed. In the viewfinder, the <j> icon will blink.

•In the <H> film advance mode, the camera stops shooting automatically after taking the three AEB shots. In the <J> (single frame) mode, press the shutter button completely three times to take the three AEB shots.

•If you use the self-timer or remote control, the three AEB shots will be taken continuously automatically.

•If C.Fn-05-1 is set (mirror lockup), single-frame film advance will take effect during AEB shooting even if the continuous film advance mode has been set.

•AEB can also be set in combination with exposure compensation. If you set the exposure compensation amount beyond the displayable range, the indicator will look as shown below. However, the exposure compensation amount will still take effect.

In the <S> <R> <E> <Q> modes:

: ±1 stop AEB.

: ±1 stop AEB with –1-stop exposure compensation.

: ±1 stop AEB with –1.5-stop exposure compensation.

: ±1 stop AEB with –2-stop exposure compensation.

In the <W> mode:

: ±1 stop AEB with –2-stop exposure compensation.

: ±1 stop AEB with over –2-stop exposure compensation.

69

Image 69

Canon ELAN7NE-33V, ELAN7NE-30V Date, ELAN7N-33V manual Canceling AEB, S R E Q modes

Contents

Instructions Page Thank you for purchasing a Canon product Symbols Contents User-Controlled Shooting Camera Care and Storage Handling Cautions LCD Displays How Low Battery Levels Affect Camera OperationBatteries Lens Electrical Contacts Quick Start Guide Install the batteries Attach a lensLoad the film Batteries as shown. p.18 On the lens, set the focus mode switch to AF. p.20 4Turn the Mode Dial to8Unload the film Mirror p.75 Contacts p.7 Nomenclature Date Model only With an EX-series Speedlite AEB Nomenclature LCD Panel Viewfinder Information Creative Nomenclature Mode DialBasic Zone Creative Zone AF Mode Dial Eye Control Switch m Model onlyFilm Advance Mode Lever Reference page numbers are in parentheses Conventions Used in this Instructions Attaching the Strap Before You Start Open the battery compartment Installing the BatteriesInstall the batteries Closecover. the battery compartment Checking the Battery Level Turn the Mode Dial to a shooting modeBattery Life Mounting and Detaching a Lens Mounting a LensDetaching the Lens When it is pressed halfway When it is pressed fullyHow the Shutter Button Works Loading Film 5Loading and Unloading Film Move the 7 arrow to the D icon Checking the Film Speed Unloading Film To rewind the film in midroll, follow the procedure below6Midroll Rewind Press the 6 button 2Turn the dioptric adjustment knob Dioptric AdjustmentRemove the eyecup Reattach the eyecup Holding the Camera Fully Automatic Shooting Turn the Mode Dial to Y, U, I, O, P, or a 2Aim any of the AF points on the subject YFull Auto ModeFocus the subject Press the shutter button halfway to focus AF-Assist beam with the Built-in Flash Take the pictureCompose the shot and press the shutter button fully Portrait Programmed Image Control ModesLandscape This is for wide scenic views, night scenes, etc Night Portrait Sports To cancel red-eye reduction, set W on the LCD panel Move the 7 arrow to the F icon on the LCD panel2Turn the l dial to set E on the LCD panel Set the film advance mode lever to p QUsing the Self-timerSThe K icon will be displayed on the LCD panel 2Take the picture Remove the eyecup from the eyepiece Using the Eyepiece CoverPush up both sides at the bottom Eyecup 2Attach the eyepiece cover Press the q button Imprinting the Date or Time Date Model only Replacing the Date Battery AF Modes and Metering Modes Selecting the AF Mode AI Servo AF for Moving Subjects One-Shot AF for Still Subjects AI Focus AF for Automatic AF Mode Switching Selecting the AF Mode∗ Predictive AF 3Selecting an AF Point Basic Procedure for AF Point Selection Manual Selection Automatic Selection3Selecting an AF Point Display all AF points in red Set the Eye Control switch to e Calibration ProcedureEEye Control Calibration m Model only 2Select a blinking CAL No EEye Control Calibration m Model only 11Set the Eye Control switch to g Intelligent Eye Control Deleting Eye Control Calibration Settings Select a non-blinking CAL NoPress the w button and 3 button simultaneously Set the Eye Control switch to e 2Select the CAL No GUsing Eye Control m Model onlySet the Eye Control switch to g 4Select a shooting mode Turn the Mode Dial to select the desired shooting mode Turning Off Eye Control Eye Control Servo AF 2Select the desired AF point Focus the subject Focusing Off-Center Subjects 8Manual Focusing When Autofocus Fails Manual FocusingDifficult Subjects for Autofocusing SetMF.the lens focus mode switch to 2Focus the subject ZMetering Modes CCenter-weighted averaging meteringZEvaluative metering XPartial metering User-Controlled Shooting Turn the Mode Dial to S Program AECheck the display 4Take the picture Difference Between S and YAbout Program Shift Shutter-Priority AE Turn the Mode Dial to R 2Select the desired shutter speedPress the shutter button halfway to focus the subject 4Check the viewfinder display and take the picture Shutter Speed Display Turn the Mode Dial to E 2Select the desired aperture value Aperture-Priority AESThe shutter speed is set automatically Aperture Value Display Depth-of-field Preview Manual Exposure Turn the Mode Dial to W 2Select the desired shutter speedSelect the desired aperture value 4Press the shutter button halfway to focus the subject 6Take the picture Determine the exposure 2Turn the Eye Control switch to Select the AF point Turn the Mode Dial to Q. sThe AF mode will be setDepth-of-field AE Depth-of-field AE with a Manually-Selected AF Point 4Focus the nearest subject Focus farthest subject6Compose the picture and press the shutter button halfway Make sure the correct CAL No. has been set. p.48 Turn the Mode Dial to Q 2Set the Eye Control switch to gFocus the nearest subject you want in focus Picture Press the shutter button halfway Depth-of-field AE Exposure Compensation 2Check the exposure settingPress the shutter button halfway and check the display Set the exposure compensation amount LAuto Exposure Bracketing AEB SThe picture will be taken in the current film advance modeMoveicon. the 7 arrow to the L Look at the LCD panel and press the 0 button S R E Q modes Canceling AEB 2Press the j button sThe j icon will light JAE Lock Bulb Exposures Turn the Mode Dial to W 2Set the shutter speed to y4Start the bulb exposure. sDuring the bulb exposure, y Blinks on the LCD panel 4Multiple Exposures Moveicon. the 7 arrow to2Set the desired number of multiple exposures Setting the ISO Film Speed HSelecting the Film Advance Mode2Set the desired film speed Turn the l dial to set the film speed Turn the l dial To enable the beeper to sound, set to E 2Set the setting to W9Silencing the Beeper BLCD Panel Illumination Press the shutter button fully. sThe mirror will lock up Mirror LockupSAfter 30 seconds, it will go back down automatically 2Pressagain. the shutter button fully KWireless Remote Control Using the Remote SwitchTurn the film advance mode lever to p Flash Photography A Basic Zone Mode Using the Built-in FlashA Creative Zone Mode This mode gives the same flash result as the S mode ISO Flash Distance Range With EF28-105mm f/3.5-4.5 Using the Built-in Flash AFlash Exposure Compensation Move the 7 arrow to the a icon on the LCD panel2Set the flash exposure compensation amount Using an EX-series Speedlite Using an EOS-dedicated SpeedliteUsing an EZ/E/EG/ML/TL-series Speedlite About E-TTL II Autoflash Using an EOS-dedicated Speedlite Custom Functions C.Fn Turn the Mode Dial to G. sThe V icon and Custom GSetting a Custom FunctionSet the Custom Function setting 2Select the Custom Function No Enabled Disabled Custom Function SettingsMakes focusing and AE lock separate operations Increase the film rewind speed Custom Function Settings Disabled Normal operation Enabled1st-curtain sync 2nd-curtain sync Auto 125 sec. fixed OffButton + l u Disabled Enabled AF stop AF startAE lock while metering Exposure Basic Photography TermsShutter speed Aperture value Basic Photography Terms Depth of field Feature Availability Table AE Lock Effects AF Mode and Film Advance Mode Combination Program Line Description Program Line There was camera shake when the picture was taken Picture looks blurred Lens focus mode switch is set to MFR icon blinks on the LCD panel Battery level is very low Misoperation has occurred Major Specifications Exposure control Major Specifications Film transport Index Shutter Button CT1-1265-000 Canon INC