Responding to Error Messages
69:Multiple wireless LAN terminals have been found. Cannot connect. Retry from the beginning.
Connection is in progress by other access points in Pushbutton Connection mode (PBC mode) of
XWait a while before trying to establish the connection, or try to establish a connection in PIN code connection mode (PIN mode) (p.62, 111).
91: Other error
A problem other than error number 11 to 69 occurred.
XTurn off and on the camera’s power switch.
101: Could not establish connection
Has the procedure to establish a connection between cameras been performed on the other camera as well?
XPerform the procedure to establish a connection between cameras on the other camera as well.
XWhen reconnecting cameras for which connection settings have been registered, perform the reconnection procedure on both cameras.
Is connection being attempted by multiple cameras?
XThe camera can be connected to only one camera at a time. Confirm that no other camera is attempting to establish a connection nearby and retry connection.
102: Could not send files
Are both cameras attempting to send data?
XCameras cannot receive and send data at the same time. Use only one camera to send data, and send data only after all data currently being sent has been received.
Does the card in the camera to receive data have sufficient space?
XCheck the card in the camera to receive data. Replace the card or make sufficient space available, then try sending the data to the camera again.
Is the card in the camera to receive data locked?
XCheck the card in the camera to receive data. Release the lock, then try sending the data to the camera again.
159