Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds.
You can continue to display images regardless of the review duration setting with the following procedures.
•Keeping the shutter button pressed after a shot.
•Pressing the FUNC./SET or DISP. button while the image is dis- played in the LCD monitor.
To stop displaying the image, press the shutter button halfway.
See the Advanced Guide: Review (p. 24).
Î
Î
See the Advanced Guide: Checking for Focus Right After Shooting (p. 70).
See Erasing (p. 20).
Selecting a Shooting Mode
1.Slide the mode switch to 
(Rec.), 
(Special Scene Mode) or 
(Movie) (a).
2.Press the FUNC./SET button (b) and use the 
or 
button (c) to select a shooting mode.
You can also use the touch control dial to make a selection.
3.Press the FUNC./SET button (d).
a
c
b d
12
