the heat given off by the LCD screen, which can contribute to condensation inside the housing and fogging.
10.You should take the first dive without the camera inside the housing. You should check that the water tight seal has not been affected during transport and long periods of storage.
11.It is likewise recommended to visually monitor the housing during every descent, especially for the first 10 meters/33 ft. If water is observed entering the housing or bubbles escaping from it, the housing should be rotated to a port down position and held that way as you return to the surface immediately and get it out of the water.
12.It is recommended to have all Fantasea housings serviced once a year at an authorized Service Center. This includes visual inspection and possible changing of all seals, gaskets and
19
