Problems starting CanoCraft CS-P as a TWAIN driver from within another application

Cause 1: Insufficient memory (RAM) available to start CanoCraft CS-P

Solution: Close other programs and start CanoCraft CS-P

Cause 2: CanoCraft CS-P already running as a stand-alone program

Solution: Close the version of CanoCraft CS-P that is already running

Cause 3: CanoCraft CS-P not installed

Solution: Install CanoCraft CS-P (See p. 33)

Cause 4: Application program is not TWAIN_32 compatible

Solution: Start CanoCraft CS-P from within a TWAIN_32-compatible program

Cause 5: Printing in progress

Solution: CanoCraft CS-P cannot be started as a TWAIN driver while printing is in progress. Start CanoCraft CS-P after printing finishes

64