Canon FB330P/FB630P manual CanoCraft CS-P will not start, CanoCraft CS-P Copy will not start

Cause 2:	Scanner not detected because the power cord plug is not correctly
	connected to the scanner
Solution:	Reconnect the power cord to the scanner (See p. 26)
Cause 3:	Scanner not detected because a parallel cable is not securely
	fastened to the scanner or computer
Solution:	Securely fasten the parallel cables (See p. 23)
Cause 4:	DMA transmission through parallel port failed
Solution:	Change the parallel port settings (See Getting Started)

CanoCraft CS-P will not start

Cause 1:	Insufficient memory (RAM) available to run CanoCraft CS-P
Solution:	Close other programs and run CanoCraft CS-P
Cause 2:	CanoCraft CS-P Copy running
Solution:	CanoCraft CS-P cannot run at the same time as CanoCraft CS-P
	Copy. Close CanoCraft CS-P Copy (See CanoCraft CS-P User’s Guide)
Cause 3:	CanoCraft CS-P already running within another application as a
	TWAIN driver
Solution:	Close the version of CanoCraft CS-P running within the other
	application and restart (See CanoCraft CS-P User’s Guide)

CanoCraft CS-P Copy will not start

Cause:	CanoCraft CS-P running
Solution:	Close CanoCraft CS-P

63