Canon G10 Subject in recorded image is too dark, Subject in recorded image is too bright, or image flashes white

238

Subject in recorded image is too dark.

Insufficient light for	zSet the built-in flash to	(Flash on)
shooting.	(p. 73).

zUse a high-output externally mounted flash.

zSet [ND Filter] to [Off] (p. 140).

The subject is	zSet the exposure compensation to a
underexposed because	positive (+) setting (p. 137).
the surroundings are too zUse the AE lock or spot metering
bright.	functions (p. 141).

Subject is too far away for zShoot within correct flash range of the

flash to reach.subject when using the built-in flash (p. 277).

zRaise the ISO speed and then shoot (p. 87).

Subject in recorded image is too bright, or image flashes white.

Subject is too close,		zShoot within correct flash range of the
making the flash too		subject when using the built-in flash
strong.		(p. 277).
		zAdjust [Flash Exp. Comp] or [Flash
		Output] in the [Flash Control] menu
		(p. 113).
		zSet the safety FE to [On] (p. 114).
The subject is		zSet the exposure compensation to a
overexposed because the		negative (–) setting (p. 137).
surroundings are too dark.		zUse the AE lock or spot metering
		functions (p. 141).
		zSet [ND Filter] to [On] (p. 140).
Too much light is shining		zChange the shooting angle.
directly into the camera, or
is being reflected off the
subject.
Flash is set to	(Flash	zPush down the flash to	(Flash off)
on).		(p. 73).