When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.

During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene.

Capturing Photos

You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed. Please read the IMPORTANT section before using an Eye-Fi card.

To select the photo capture settings

1 Press .

2 Select the photo capture setting.

[Other Settings] >r>[Photo Capture from Video]

>[ÚSingle Photo] or [pPhoto Sequence] >[X]

To capture the photos

1Play back the scene or story from which you want to capture the photo.

2 Pause the playback at the point you want to capture.

3Touch [PHOTO].

To capture a photo sequence, keep touching [PHOTO]. The scene will be played back frame-by-frame and each frame captured as a separate photo.

4 Touch the screen and then touch [Ñ] to stop the playback.

IMPORTANT

When capturing photos on an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always

verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (A159).

Video Š 127