2 Set up a new connection point.

[ Wi-Fi] >[Wi-Fi Setup] >[Network Setup] >[ ] >[Set Up New]*

* To replace the current settings, touch [Edit] instead and then manually change the settings. To delete the settings, touch [Delete] and then [Yes].

3 Enter the details of the connection.

Enter an SSID (up to 32 characters) and channel of your choosing >[OK] >Enter the authentication/encryption method* and, if applicable, the encryption key** >[OK]

*If you select [Open], you can select [No Encryption] or [WEP]. If you select [Shared Key WEP], you will need to specify the WEP index key.

**Enter an encryption key of your choosing. The encryption key must be one of the following.

-5 or 10 alphanumeric characters

-10 or 26 hexadecimal characters (0-9, A-F)

4 Touch [Automatic] to automatically obtain an IP address.5 Touch [No].• You can touch [Check urrent Configuration] to review the network settings.6Save the settings of the connection point.

[Yes] >[OK]* >[X]

* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]

>[Check Current Configuration] >Desired connection point >[Î] or [Í]

>[K] three times when finished.

NOTES

If you attempt to test the settings and the camcorder is able to send a Wi-Fi signal, then a message will be displayed indicating that the con- nection was successfully established even when the camcorder has not established a connection to the iOS device.

174Š Wi-Fi Functions