Intelligent IS

Intelligent IS allows the camcorder to select the best image stabilization option based on your shooting method. The Intelligent IS icon will change to one of the

following icons. In and modes, you can set the image stabilization manually (A97).

Shooting methodIcon

Most general situations; Zooming out (zooming toward

Ä(Dynamic IS)

T); Following subjects at a distance moving left or right

 

Zooming in (zooming toward S)È(Powered IS)*

 

 

Close-up of a subject(Macro IS)

 

 

Remaining stationary, such as when using a tripod

(Tripod mode)

 

 

* You can turn off Powered IS through the [ Main Functions] panel (A97).

IMPORTANT

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory.

-Do not open the memory card slot cover.-Do not disconnect the power source or turn off the camcorder.-Do not change the camcorder’s operating mode.

Be sure to save your recordings regularly (A141), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.

Recordings on an Eye-Fi card will be uploaded automatically after set- ting the camcorder to playback mode, if you are within the range of a configured network. Always verify that Eye-Fi cards have been

approved in the country/region of use. See also Using an Eye-Fi card (A159).

NOTES

About the power saving mode: If q>[Power Saving Mode] >[Auto Power Off] is set to [iOn], the camcorder will shut off automatically

to save power when it is powered by a battery pack and is left without any operation for 5 minutes. Press Pto turn on the camcorder.

48 Š AUTO Mode